PG 142: GIBSON ES-175
2 hum with dimples for PU screws,
no screw holes, uses brad at neck
& block for side bracket
OEM MATERIAL: 122 with
wide bevel: $35.00
WE ALSO HAVE:
just like PG 142 above but with
screw hole by neck
WE ALSO HAVE:
2 P-90 pu, no screw holes,
tip of guard to top of neck pu
cut measures 2-1/16"
OEM MATERIAL: 122 with
wide bevel: $35.00
PG 159: GIBSON ES-120T
OURS IS NOT 3D MOLDED
LIKE THE ORIGINAL - it is
available as a regular flat
pickguard - 4 screw holes,
1 melody maker pu, 2 knobs
& jack
PG 190: GIBSON 1956 ES-175
1 P90 pu, no screw holes
OEM MATERIAL: Color
122 with wide bevel: $35.00
1 P90 pu, no screw holes
OEM MATERIAL: Color
122 with wide bevel: $35.00
PG 19004: GIBSON ES-165
1 hum w/dimple for pu screw,
screw hole by neck
OEM MATERIAL: Color
122 with wide bevel: $35.00
ES-165 "Herb Ellis"
1 mini hum, 2 screw holes,
hole for volume knob
OEM MATERIAL: Color
122 with wide bevel: $35.00
(no photo available)
PG 19008: GIBSON
2010 Custom Shop ES-137
1 HUM, 1 screw by neck
OEM MATERIAL: Color
122 with wide bevel: $35.00
PG 202: GIBSON ES-150 or L-7
string edge measures
9-15/16", pickup rout
located 3-13/16" down
from the neck, pickup
rout measures 1-9/16"
(neck to bridge) and
cuts 5/8" into the guard
OEM MATERIAL: Color
122 with wide bevel: $35.00
for fat body Trini,
2 hum, screw hole by
neck
OEM MATERIAL: Tortoise
w/binding - we do not have
that color available; best
alternative is color 122 with
wide bevel: $35.00
1 screw hole by neck, uses round threaded
bracket for body, includes block on back
OEM Material: color 122 black/parchment
5-ply with wide bevel: $
1 mini hum, hole for volume knob,
2 screw holes, measure from tip of
guard to top of neck pu cut: 1-1/8"
OEM MATERIAL: Tortoise
w/binding - we do not have
that color available; best
alternative is color 122 with
wide bevel: $35.00
2 mini hum PU, 5 control holes,
5 screw holes
OEM MATERIAL: Tortoise
w/binding - we do not have
that color available; best
alternative is color 122 with
wide bevel: $40.00
2 humbucker cuts, 1 screw by neck,
uses block on back & threaded rod
body bracket
OEM MATERIAL: Color
122 with wide bevel: $35.00
P-90 PU, screw hole at neck, ours
does not have the screw hole
mid body
OEM MATERIAL: COLOR 37 no
bevel: $49.00
PG 2050: GIBSON ES-135
2 P-90 pU, screw hole by neck
OEM MATERIAL: color 122 with
wide bevel
OEM MATERIAL: Tortoise
w/binding - we do not have
that color available; best
alternative is color 122 with
wide bevel: $35.00
PG 20502: GIBSON ES-135
with 2 hums, screw hole by neck
OEM MATERIAL: color 122 with
wide bevel: $35.00
PG 282: GIBSON ES-125
non-cutaway, P-90 pu,
tip of guard to top of
pu cut measures 3-7/8",
2 screw holes
OEM MATERIAL:
Color 37 no bevel: $49.00
PG 283: GIBSON 1965 ES-125C
single P-90 PU, 2 screw holes, for
cutaway model, tip of guard to top
of pu cut measures 2"
OEM MATERIAL:
Color 37 no bevel: $49.00
PG 5011: GIBSON 1969 L-5 CES
2 hum cuts with dimples for pu screws,
measure between pickup routs is
3 inches, measure from tip of guard
to top of neck pu: 7/8", screw hole by neck
OEM MATERIAL: Tortoise with binding-
we do not offer this; best alternative is color
122 with wide bevel: $35.00
WE ALSO HAVE:
Like PG 5011 above but 2 screw
holes, slightly larger profile &
measure from tip of guard to top
of neck pu: 1-5/8"
OEM MATERIAL: Tortoise with binding-
we do not offer this; best alternative is color
122 with wide bevel: $35.00
2 hum w/dimples for pu screws,
screw hole by neck
OEM MATERIAL: Tortoise with binding-
we do not offer this; best alternative is color
122 with wide bevel: $35.00
Uses flat bracket to attach to side of body,
2 screw holes, 2 humbuckers
OEM Material: Tortoise with binding-
we do not offer this; best alternative is color
122 with wide bevel: $35.00
2 screws, cut for 2 hums
OEM MATERIAL: color 122 with
small bevel: 24.00
PG 20402: GIBSON HOWARD ROBERTS
1 hum, tip of guard to top of pu cut
measures 1-3/4", 2 screw holes
OEM MATERIAL: Tortoise with binding-
we do not offer this; best alternative is color
122 with wide bevel: $35.00
WE ALSO HAVE:
PG 20406: GIBSON HOWARD ROBERTS
1 hum, tip of guard to to edge of pu
measures 1-1/2", 2 screw holes
OEM MATERIAL: Tortoise with binding-
we do not offer this; best alternative is color
122 with wide bevel: $35.00
WE ALSO HAVE:
PG 2040: GIBSON HOWARD ROBERTS
1 mini-humbucker, tip of guard to
top of pu cut measures 1"
OEM MATERIAL: Tortoise with binding-
we do not offer this; best alternative is color
122 with wide bevel: $35.00
WE ALSO HAVE:
not a reissue - 1 mini-humbucker,
tip of guard to top of pu cut
measures 15/16", 2 screw holes
OEM MATERIAL: Tortoise with binding-
we do not offer this; best alternative is color
122 with wide bevel: $35.00
